Husqvarna PP65 Manuel D'utilisation page 10

Personal safety
• Never leave the machine unsupervised with the motor
running.
• Always unplug the power supply to the power pack for
longer work breaks.
• Never work alone, always ensure there is another
person close at hand. Apart from being able to receive
help to assemble the machine, you can also get help
if an accident should occur.
• People and animals can distract you causing you to
lose control of the machine. For this reason, always
remain concentrated and focused on the task.
• People that need to be in close proximity of the
machine must wear hearing protection as the sound
level when cutting exceeds 85 dB(A).
• Always work in a manner that permits easy access to
the emergency stop. If an emergency situation should
arise anyway, push the red emergency stop button on
the power pack or the stop button on the remote
control.
Use and care
This machine is only intended for use together with the
intended Husqvarna products. All other use is forbidden.
• The machine is intended for use in industrial
applications by experienced operators.
• Inspection and/or maintenance should be carried out
with the motor switched off and the plug disconnected.
• Always switch off the machine before you move it.
• Observe care when lifting. You are handling heavy
parts, which implies the risk of pinch injuries or other
injuries.
• Never pull out the power cable without first switching
off the power pack and waiting for the engine to come
to a complete halt.
• Do not overload the machine. Overloading can
damage the machine.
• Check that all couplings, connections and cables are
intact and free from dirt.
10 – English
OPERATING