Labeling A Station/Disc; Adjusting Setup Items - Set - Sony CDX-R3310 Mode D'emploi

To restore the factory-set equalizer curve,
press and hold (SEL) before the setting is
complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 3, to adjust the selected item, press <, M, ,
or m.

Labeling a station/disc

When you receive a station, or play a disc in a
CD changer with the CUSTOM FILE function,
you can label each station/disc with a custom
name up to 8 characters (Station Memo/Disc
Memo).
If you label a station/disc, the name appears on
the list (page 9 or 11).
1
While receiving a station or playing a
disc that you want to label, press and
hold (LIST).
2
Press the volume +/– button
repeatedly until the desired character
appears.
To move the digital indication, press (SEL).
A y B y C ... y 0 y 1 y 2 ... y +
y – y ... y
Repeat this operation until the entire name is
entered.
3
Press and hold (LIST).
The labeling is complete and the display
returns to normal play/reception mode.
To display the name, press (DSPL) during
reception or playback.
Tips
• To correct or erase a character, overwrite or enter
" ."
• The Disc Memo always takes priority over any
prerecorded title.
• You can label a disc on the unit if a changer with the
CUSTOM FILE function is connected.
• "REP-TRACK" and all shuffle play are suspended
until the labeling is complete.
With the card remote commander
In step 2, to select the character, press M or m.
Deleting the custom name
1 Select the radio, or the unit that has stored the
custom name you want to delete, then press
and hold (LIST).
2 Press and hold (DSPL).
The stored name will flash.
10
(blank space) y A
3 Press the volume +/– button repeatedly to
select the name you want to delete.
4 Press and hold (SEL).
The name is deleted. Repeat steps 3 and 4 to
delete other names.
5 Press and hold (LIST).
The unit returns to normal play/reception
mode.
With the card remote commander
In step 3, to select the name, press M or m.
Adjusting setup items
— SET
1
Press and hold (SEL).
The setup display appears.
2
Press (SEL) repeatedly until the
desired item appears.
3
Press the volume +/– button to select
the setting (example "ON" or "OFF").
4
Press and hold (SEL).
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
With the card remote commander
In step 3, to select the setting, press < or ,.
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
CLOCK-ADJ
(page 4)
(Clock Adjust)
BEEP To set "BEEP-ON" (
"BEEP-OFF."
SUB/REAR* 1 To switch the audio output.
– "SUB" (
subwoofer.
– "REAR": to output to a
power amplifier.
DIM (Dimmer) To change the brightness of the
display.
– "DIM-ON": to dim the
display.
– "DIM-OFF" (
deactivate the dimmer.
DEMO*
1 To set "DEMO-ON" (
(Demonstration) "DEMO-OFF" (page 4).
A.SCRL
To scroll long displayed items
(Auto Scroll) automatically when the group/
track is changed.
– "A.SCRL-ON": to scroll.
– "A.SCRL-OFF" (
scroll.
) or
z
): to output to a
z
): to
z
) or
z
): to not
z