Maintenance Chart; Storage - Efco MT 1800E Manuel D'utilisation Et D'entretien

I
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily work requires longer than normal
GB or harsh cutting conditions are present the suggested intervals should be
shortened accordingly.
Complete Machine
F
Controls (on/off switch, safety
button)
D Chain Brake
Oil Tank
E
Chain Lubrication
Saw Chain
SK
P
Guide Bar
GR
Rim Sprocket
TR
Chain Catcher
CZ
All Accessible Screws and Nuts
RUS
UK
Motor crankcase louvers
Power cable
PL

9. STORAGE

If the machine is to be stored for long periods:
- Make see that the elec trical plug is
disconnected from the mains.
- Follow all the maintenance regulations
described above.
- Completely empty the tank of chain
32

MAINTENANCE CHART

Inspect (Leaks, Cracks, and Wear)
Check Operation
Check Operation
Check by Dealer
Inspect (Leaks, Cracks, and Wear)
Check operation
Inspect (Damage, Sharpness, and Wear)
Check Tension
Sharpen (Check Gauge Depth)
Inspect (Damage, and Wear)
Clean Bar groove and Oil Passages
Rotate, Lubricate Sprocket Nose and
Deburr
Replace
Inspect (Damage, and Wear)
Replace
Inspect (Damage, and Wear)
Replace
Inspect - Retighten
Clean
Inspect (Damage, and Wear)
- Run the machine empty to completely
- Clean the saw thoroughly.
- Put the blade-cover on. Store the saw in a
X
X
X
X
X
X
X
X
X
X
X
lubricant and close the cap
empty also the delivery pipe and the oil
pump.
dry place, preferably off the ground, and
away from heat sources.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X