Technical Description; Installing The Seat Heater - Dometic MAGICCOMFORT MSH300 Instructions De Montage Et De Service

Technical description

5 Technical description
The heating elements for the MagicComfort seat heating MSH300 and MSH301
can be installed in the driver's seat and in the passenger seat.
The shape of the seat is not altered by the heating elements.
The seat heater is operated using a switch.
6

Installing the seat heater

Tools required (fig. 1, page 3)
6.1
For installation and assembly you will need the following tools:
• Drill bit set (1)
• Drill (2)
• Screwdriver (3)
• Set of ring or open-ended spanners (4)
• Measuring ruler (5)
• Hammer (6)
• Centre punch (7)
To make and test the electrical connection, the following tools are required:
• Diode test lamp (8) or voltmeter (9)
• Crimping tool (10)
• Insulating tape (11)
• Hot air blower (13)
• Soldering iron (14)
• Solder (15)
• Cable bushing sleeves (if necessary)
To fasten the cables you may require additional cable binders.
14
MSH300, MSH301
EN