Publicité
TROUBLESHOOTING
PROBLEM
CAUSE
The power supply cord is not plugged in
to the power socket.
The machine does not
turn on.
The main on/off switch is positioned
on "0".
No water in the tank.
Capsule not inserted in the capsule
compartment.
The capsule inserted does not dispense
coff ee.
The moveable part of the top of the ma-
chine is not completely closed.
The machine does not brew
coff ee.
The
or
pressed.
The water tank has not been correctly
inserted.
Internal components with limescale
buildup
The pump did not prime.
Water leaks out.
Incorrect type of capsule.
48
Connect the plug to a socket which complies with the technical specifi cations indicated in the data plate under the base
of the machine.
Position the main on/off switch on "I".
Fill tank with water.
Insert one capsule in the capsule compartment.
Remove the capsule by disengaging and lifting the lever and retrieve it from the used capsule tray. Close the capsule
compartment and dispense a small quantity of water. Refi t the capsule and start brewing.
Lift the lever and make sure that you have inserted the capsule correctly. Lower the moving part and lock by lowering the
lever. Press the
or
buttons have not been
Press the
or
button again.
Check that the water tank is completely inserted.
Descale the machine as described in the related paragraph.
Try to dispense water with no capsule inserted in the compartment.
Make sure that you are using an "Iperespresso" capsule for household use identifi ed by the "Ground coff ee single-dose
capsule for household use" label on the package.
SOLUTION
buttons to brew coff ee.
If problem
persists
Contact an
authorized
Service Center.
Publicité
Chapitres
