Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
PABX / Supplementary Services
Searching for the handset (Paging)
If you have mislaid your handset, you can sound a paging tone to find
it.
˜ {«}
˜ or ©
Switching the handset off and on
You can switch the handset off to save the batteries.
3 sec. ‹
3 sec. ‹
6 PABX / Supplementary Services
R function in private branch exchanges
If the telephone is connected to a private branch exchange (PABX),
functions such as transferring calls and automatic call back can be
used via the R button. Refer to the operating manual provided with
your private branch exchange as to which Flash time must be set in
order to use these functions. The sales outlet where you purchased
the exchange can provide information as to whether the telephone will
work properly with the exchange. The Flash time is set using the
menu. Refer to Page 99 for the (Recall Mode) menu option.
R function and supplementary services
Your telephone supports supplementary services provided by your te-
lephone network provider, such as brokering, call waiting and confe-
rence facilities. Press the R button to use the supplementary ser-
vices. Please contact your telephone network provider regarding
which Flash time must be set to use the supplementary services. Also
contact your telephone network provider with regard to enabling sup-
plementary services. The Flash time is set using the menu. Refer to
Page 99 for the (Recall Mode) menu option.
1
CLIP: Calling Line Identification Presentation = Displays the cal-
ler's phone number.
94
Start the search tone
End the search tone
Switch the handset off
Switch the handset on
96
Caller number display (CLIP
The caller number display (CLIP) is a supplementary service
offered by your telephone network provider. Contact your
network provider for further information.
If this function is available with your telephone line, the number of the
caller appears in the display when the phone rings. If the caller has
suppressed transmission of his phone number, the corresponding
message appears in the display. The phone number is not displayed
and, as a result, is not stored in the CID book.
Dialling pause
When using private branch exchanges, it is necessary to dial an ac-
cess code to obtain the dialling tone for an outside line. When using
some older private branch exchanges, it takes a little time before the
dialling tone becomes audible. In the case of such private branch ex-
changes, a dialling pause can be inserted after the number for an out-
side line in order to continue dialling directly without having to wait for
the dialling tone.
3 sec. æ
The actual phone number is dialled a certain time after the number for
an outside line.
The dialling pause can also be entered with the phone num-
bers in the phone book.
Answering machine in the telephone network
An answering machine in the telephone network is a supplementary
service offered by many telephone network providers. If your tele-
phone network provider offers an answering machine in the telephone
network for you, an icon on the display informs you of new messages
2
received (VMWI
). This function can only be used when your tele-
phone network provider actually offers the service. Contact your net-
work provider for further information.
2
VMWI: Visual Message Waiting Indication = Visual indicator that
new messages have been recorded.
1
)
97
Insert a dialling pause
98
Publicité
Table des Matières
