Safety Information - switel DFT 107 Série Mode D'emploi

2 Preparing the Telephone

Safety information

Attention: It is essential to read the Safety Information in
Chapter 1 before starting up.
Checking the package contents
The package contains:
Content
Base station with power adapter
plug
Charging station with power
adapter plug
Handset
Telephone connection cable
Batteries
Operating instructions
1
Visit www.switel.com to find out whether the telephone set is al-
ready available.
85
Model DFT 1071
DFT DFT DFT DFT
1 1
1071 1072 1073 1074
1 1 1
− 1 2
1 2 3
1 1 1
2 4 6
1 1 1
Connecting the base station
Attention: Position the base station at least 1 m away from
other electronic devices, otherwise there is a risk of mutual
disturbance.
Connect the base station as illustrated in the diagram. For reasons of
safety, only use the power adapter plug and telephone connection line
supplied.
Mains power outlet
1
Telephone line socket
1
3
Attention: Use the adapter with the transparent plug to con-
4
nect the base. The adapter is rated at (Output 7.5 V, 300 mA).
1
Connecting the charging station
8
Connect the charging station
as illustrated in the diagram.
1
For safety reasons, only use
the power adapter plug sup-
plied.
2
Only applies to telephone sets with at least two handsets
. Checking the package contents" on Page 87.
Preparing the Telephone
2
Mains power
outlet
87