Keep Warm Function; Switching On The Keep-Warm Function; Switching Off The Keep-Warm Function; Wipe Protection - NEFF T18 D36 Série Notice D'utilisation

Keep warm function

en
zKeep warm function
The Keep warm function is suitable for melting
K e e p w a r m f u n c t i o n
chocolate or butter and for warming food and cookware

Switching on the keep-warm function

Select the hotplate.
1.
Touch the L symbol.
2.
appears in the heat setting display. The keep-warm
–
function is switched on.

Switching off the keep-warm function

Select the hotplate.
1.
Touch the L symbol.
2.
display.
The keep-warm function is switched off.
kWipe protection
If you wipe over the control panel while the hob is
W i p e p r o t e c t i o n
switched on, settings may be changed.
To prevent this from happening, your hob has a wipe
protection function. Touch the
off. The display light above the
control panel is locked for 30 seconds. You can now
wipe over the control panel without changing any
settings.
Note: The primary switch is not affected by the wipe
protection function. You can switch off the hob at any
time.
[Energy consumption
indicator
You can use this function to display the total energy
n i n d i c a t o r E n e r g y c o n s u m p t i o
consumption between switching the hob on and off.
Once switched off, the energy consumption is displayed
in kilowatt hours (e.g. 1.08 kWh) for 10 seconds
The accuracy on the display depends on the voltage
quality of the power supply, among other factors.
36
lights up on the heat setting
‹
symbol. A beep goes
z
symbol lights up. The
z
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.~ Page 36
QBasic settings
Your appliance has various basic settings. You can
B a s i c s e t t i n g s
adjust these settings to meet your own needs.
Display Function
Automatic child safety lock
™‚
Switched off.*
‹
Switched on.
‚
Manual and automatic child safety lock switched off.
ƒ
Beeping sound
™ƒ
Confirmation signal and operation error signal are
‹
switched off (primary switch signal always remains).
Only the operation error signal is switched on.
‚
Only the confirmation signal is switched on.
ƒ
Confirmation signal and operation error signal switched
„
on.*
Energy consumption display (Ask your electric com-
™„
pany what the mains voltage is)
Consumption display switched off.*
‹
Consumption display with mains voltage at 230 V.
‚
Consumption display with mains voltage at 400 V.
ƒ
Consumption display with mains voltage at 220 V.
„
Consumption display with mains voltage at 240 V.
...
™† Automatic timer
Switched off.*
‹‹
Cooking time, after which the hotplates switch off.
‹‚ - ŠŠ
Duration of the timer end signal
™‡
10 seconds.
‚
30 seconds
ƒ
1 minute.*
„
Activation of the heating elements
™ˆ
Switched off.*
‹
Switched on.
‚
Last setting before the hotplate was switched off.
ƒ
Time for selecting the hotplate
™Š
Unlimited: the last selected hotplate can always be
‹
adjusted without having to select it again.*
Once you select a hotplate, you have 10 seconds to adjust
‚
it, after which you will have to select it again in order to be
able to adjust it.
*Basic setting