Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Setting the cooking time
The hotplate must be switched on.
Select the hotplate using the twist knob.
1.
Touch the
3
symbol.
‹‹
2.
the twist knob to set the desired cooking time.
The cooking time counts down. If you have set a cooking time
for several hotplates, the shortest cooking time will be
displayed. The
indicator for the hotplate lights up brightly.
x
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
lights up in the hotplate display. A signal sounds.
‹
up in the timer display for one minute. The
flashes. Touch any control. The indicators go out and the
audible signal ceases.
Changing or cancelling the cooking time
Select the hotplate using the twist knob. Touch the
and change the cooking time or set to
Notes
If you wish to call up the cooking time for a hotplate, use the
■
twist knob to select the hotplate. The cooking time appears
for 5 seconds.
You can set a cooking time of up to 99 minutes.
■
Keep warm function
The keep warm function is suitable for melting chocolate or
butter and for warming food and cookware.
Switching on the keep warm function:
Select the hotplate using the twist knob.
1.
In the next 5 seconds, touch the L symbol.
2.
Wipe protection
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a wipe protection
function. Touch the
symbol. A signal sounds. The control
"
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
hotplate indicator.
28
lights up on the timer display. Use
‹‹
hotplate indicator
x
3
.
‹‹
and
flash alternately in the
"
‰
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
Basic settings section.
Note: You can change the cooking time for a hotplate or switch
off the automatic timer for the hotplates.
Select the hotplate and touch the
cooking time or set to
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
Setting the kitchen timer
No hotplate should have been selected.
Touch the
1.
Set the required cooking time using the twist knob.
2.
The timer starts counting down after a few seconds.
lights
When the cooking time has elapsed
A signal sounds for one minute and
display. The
indicators go out and the audible signal ceases.
Changing the time
symbol
Touch the
3
time.
appears in the heat setting display. The keep warm function
–
is switched on.
Switching off the keep warm function:
Select the hotplate and touch the L symbol.
heat setting display.
After approximately 5 seconds, the hotplate is switched off, and
the residual heat indicator appears.
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
Note: The main switch is excluded from the wipe protection
function. You can switch off the hob at any time.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
3
symbol. Change the
in the settings area.
‹‹
symbol,
lights up in the timer display.
3
‹‹
‹‹
V
indicator flashes. Touch any control. The
symbol and use the twist knob to change the
lights up in the timer
appears in the
‹
Publicité
Chapitres
Table des Matières
