Time-Setting Options; Automatic Hotplate Switch-Off; Automatic Timer; Kitchen Timer - NEFF T18 D36 Série Notice D'utilisation

OTime-setting options
There are 2 different time-setting options:
i o n s T i m e - s e t t i n g o p t
A hotplate should switch off automatically
■

Kitchen timer

■

Automatic hotplate switch-off

Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time
Setting the heat setting
1.
Touch the symbol. The
3
2.
required hotplate lights up.
display.
Touch the + or - symbol. The default value appears.
3.
+ symbol: 30 minutes
- symbol: 10 minutes
The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cooking
time of the selected hotplate is always displayed.
Automatic setting
Touch the - symbol continuously and the cooking time
automatically counts back as far as 0 minutes.
Touch the - symbol continuously and the cooking time
automatically counts forward as far as 99 minutes.
When the time has elapsed
When the cooking time has elapsed, the hotplate
switches off. You will hear an audible signal and
lights up in the display for one minute. The
lights up brightly. Touch the
out and the audible signal ceases.
Changing or cancelling the cooking time
Select the hotplate and touch the symbol
display lights up brightly. Set the cooking time with the
+ or - symbol or set to
Note: You can set a cooking time of up to 99 minutes.

Automatic timer

You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the pre-selected cooking time then counts down. When
display for the
x
lights up on the timer
‹‹
x
symbol. The displays go
3
. The
3
.
‹‹
the cooking time has elapsed, the hotplate switches off
automatically.
You can find out how to switch on the automatic timer in
the Basic settings section.~ Page 36
Note: You can change the cooking time for a hotplate
or switch off the automatic timer for the hotplates.
Select the hotplate and touch the symbol
display lights up brightly. Set the cooking time with the
+ or - symbol or set to
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
If a hotplate has been selected, touch the
■
twice within 10 seconds.
If a hotplate has not been selected, touch the
■
symbol.
The display lights up.
W
Setting the kitchen timer
Set the desired time with the + or - symbol.
When the time has elapsed
After the time has elapsed, you will hear a beep.
lights up in the timer display. The display
kitchen timer lights up brightly. After one minute, the
display switches off.
Displaying the time
Use the
is displayed for 10 seconds.
Setting the correct time
Use the
the time.
‹‹
bAutomatic safety cut-out
display
If a hotplate has been switched on for a long time
c u t - o u t A u t o m a t i c s a f e t y
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating.
x
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).

Time-setting options

.
‹‹
symbol to select the kitchen timer. The time
3
symbol to select the kitchen timer and reset
3
"‰
en
. The
3 x
symbol
3
3
‹‹
for the
W
and the • / œ residual
35