Time-Setting Options - NEFF T16BT.6 Série Manuel D'utilisation

en Time-setting options
9 Time-setting options
Your appliance has different time-setting options which
can be used to set a cooking time, an automatic timer
or a kitchen timer.
9.1 Cooking time
Enter a cooking time for the relevant hotplate. When
the cooking time has elapsed, the hotplate switches off
automatically.
You can set a cooking time of up to 99 minutes.
Setting the cooking time
Requirement: The hotplate is switched on.
Select the hotplate using the twist knob.
1.
Touch the touch field
2.
above the touch field
a
lights up on the timer display.
a
Within the next 10 seconds set the required cooking
3.
time with the twist knob.
a The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cook-
ing time of the hotplate selected is displayed.
a When the cooking time has elapsed, the hotplate
switches off. An audible signal sounds and
up in the hotplate display.
display for one minute. The
Note: If you touch any touch field, the displays go out
and the audible signal ceases.
Changing or cancelling the cooking time
Select the hotplate using the twist knob.
1.
36
⁠ .
flashes.
lights
flashes in the timer
display flashes.
Touch and change the cooking time or set to ⁠ ⁠ .
2.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the preselected cooking time counts down. When the
cooking time has elapsed, the hotplate switches off
automatically.
Switch on the automatic timer in the basic settings.
→ Page 37
Tip: The automatic timer is valid for all hotplates. You
can reduce or delete the cooking time for individual
hotplates. → Page 36
9.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
1. Touch ⁠ .
above the touch field
a
lights up on the timer display.
a
Use the twist knob to set the time.
2.
a The timer starts counting down after a few seconds.
a A signal sounds when the time has elapsed.
flashes in the timer display.
lights up brightly.
a The display switches off after one minute.
Switching off the timer signal
You can switch the signal off manually.
Touch any touch field.
▶
a The display goes out and the audible signal ceases.
Setting the correct time
Touch the touch field
▶
set the time.
9.3 Stopwatch function
The stopwatch function displays the time which has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the stop-
watch function is switched off as well.
Switching on the stopwatch function
Touch ⁠ .
▶
appears in the timer display.
a
a Time measurement begins.
a Seconds are displayed during the first minute, then
minutes.
Switching off the stopwatch function
Touch again.
▶
a The timer display goes out.
flashes.
above the touch field
and use the twist knob to