Danby Designer DPAC120011H Guide D'utilisation Et Soins De Propriètaire page 14

Installation Instructions
INSTALLATION IN A
DOUBLE - HUNG SASH
WINDOW
1. Cut the foam seal (adhesive type) to the proper length and attach it to
the window stool. Fig.8
2. Attach the window slider kit to the window stool. Adjust the length of
the window slider kit according to the width of window, shorten the
adjustable window kit if the width of window is less than 26.5 inches.
Open the window sash and place the window slider kit on the window
stool. Fig.9
3. Cut the foam seal(adhesive type) to the proper length and attach it on
the top of the window. Shown as in Fig.10.
4. Close the window sash securely against the window.
5. Cut the foam seal to an appropriate length and seal the open gap
between the top window sash and outer window sash. Shown in
Fig.11.
26.5''~ 48''
13
Foam seal A
(adhesive type)
Fig.8
Window Kit
Fig.9
Window Stool
Window Kit
Fig.10
Window Stool
Foam seal
Fig.11