Danby Designer DPAC120011H Guide D'utilisation Et Soins De Propriètaire page 10

Operating Instructions
BUTTON FUNCTIONS
ON CONTROL PANEL
2) / UP/ DOWN BUTTONS
• Used to adjust (increasing/decreasing) temperature settings(1°C/2°F
increments) in a range of 17°C(62°F) to 30°C(88°F).
NOTE: The control is capable of displaying temperature in degrees
Fahrenheit or degrees Celsius. To convert from one to the other, press
and hold the and
• Under Auto-timer setting, press or hold the
the Auto time by 0.5 hour increments, up to 10 hours, then
increments up to 24 hours.
3) FAN BUTTON
Press the button to select the desired fan speed:
LOW MED HIGH
NOTE: The TURBO feature is used to set the strong fan speed, the set
temperature will be reached in the shortest amount of time. This feature
is only availabe on COOL mode.
FAN OPTIONS:
AUTO (1 speeds) AUTO
COOL (5 speeds) Low-Med-Hi-Turbo-Auto
DRY(1 speed) LOW
FAN (4 speeds) Low-Med-Hi-Auto
HEAT(4 speeds) Low-Med-Hi-Auto
4) TIMER BUTTON
Used to initiate Timer ON start time / Timer OFF stop time program
using the / buttons.
5) SWING BUTTON
Allows the top horizontal louver blades to oscillate forward and
backward to the desired direction. Each press will change the swing
angle for 6 degree. keep this button pressed without releasing for 2 seconds or
more, the louver blades will oscillate forward and backward
automatically.
6) SLEEP BUTTON
Press this button, the
temperature will increase (cooling) or decrease(heating) by 1°C/2°F in
30 minutes.The temperature will then increase(cooling) or
decrease(heating) by another 1°C/2°F after an additional 30 minutes.
This new temperature will be maintained for 7 hours before it returns to
the originally selected temperature. This ends the Sleep mode and
the unit will continue to operate as originally programmed. The
Sleep mode program can be cancelled at any time during operation
by pressing the button again, turning off the unit or pressing
the MODE buttons.
NOTE: This feature is unavailabe under FAN or DRY mode.
7) BUTTON
Power switch on/off
AUTO RESTART (on some models)
If the unit shuts off unexpectedly due to the power loss, it will restart with
the previous function setting automatically when the power resumes.
9
buttons at the same time, for 3 seconds.
button to change
AUTO
TURBO
indicator displays and the selected
at one hour