Operation Of Wireless Remote Control - Danby Designer DPAC120011H Guide D'utilisation Et Soins De Propriètaire

Operating Instructions
OPERATING INSTRUCTIONS
COOL feature
• Press the "MODE" button until the "
comes on.
• Press the buttons to select your desired
room temperature. The temperature can be set
within a range of 17°C-30°C/62°F-88°F.
• Press the " " button to choose the fan speed.
HEAT feature
• Press the "MODE" button until the "
comes on.
• Press the buttons to select your desired
room temperature The temperature can be set
within a range of 17°C-30°C/62°F-88°F.
• Press the " " button to choose the desired fan
speed.
DRY feature
• Press the "MODE" button until the "
comes on.
• Under this mode, you cannot select a fan speed or adjust
the temperature. The fan motor operates at LOW speed.
• Keep windows and doors closed for the best
dehumidifying effect.
AUTO feature
• When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating , or fan only
operation depending on what temperature you have
selected and the room temperature.
• The air conditioner will control the room temperature
automatically and round the temperature point set by you.
• Under AUTO mode, you can not select the fan speed.

Operation of wireless remote control

PART IDENTIFICATION:
1) Display Window: Shows the set temperature (in °C ) and the Auto-timer settings.
2) Temp. Increase button:Press this
by one degree.
3)
Temp. decrease button:Press this button to decrease the set temperature
by one degree.
4) MODE button: Pressing rotates through
Swing Button: Used to stop or start louver movement and set the desired
5)
up/down airflow direction.
6) Reset: When pressed in, all settings are cancelled and the control returns to
its default (factory) settings.
Lock: When pressed in, all current settings become locked in (cannot be
7)
adjusted) until the lock button is pressed again.
8) Timer Off button: Press to initiate the Auto-Off program.Also used to adjust
the Auto-Off timer settings.
Timer On button: Press to initiate the Auto-On program.Also used to adjust
9)
the Auto-On and Auto-Off timer setting.
For example,if you want to let the machine on one hour later and last for one hour
and then stop,set auto on "1" and auto off "2".
FAN feature
" indicator light
• Press the "MODE" button until the "
comes on.
• Press the "
The temperature cannot be adjusted.
TIMER feature
• When the unit is on, first press the
" indicator light
TIMER OFF indicator light illuminates. It indicates the
Auto Stop program is initiated. Press the button again,the
TIMER ON indicator light illuminates. It indicates the Auto
Start program is initiated.
• When the unit is off, first press the Timer button, the
TIMER ON indicator light illuminates. It indicates the Auto
Start program is initiated. Press the button again,the
TIMER OFF indicator light illuminates.It indicates the
Auto Stop program is initiated.
" indicator light
• Press or hold the
Auto time by 0.5 hour increments, up to 10 hours, then at
1 hour increments up to 24 hours.
The selected time will register in 5 seconds and the
•
system will automatically revert back to display the
previous temperature setting.
For example,if you want to let the machine on one hour
•
later and last for one hour and then stop,set auto on
"1" and auto off "2".
button to increase the set temperature
the available operations.
10
" indicator light
" button to choose the fan speed.
button, the
button to change the
1
3
4
5
6
12
13
2
11
10
9
8
7
14