Technical Features - ERRECOM PureZone Machine Manuel D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

PureZone Machine is an electronic ultrasonic device which atomizes a sanitising liquid (CareZone) in order to be

distributed by the vehicle A/C system's recirculation system.

One of the main advantages of an ultrasonic atomization system is to obtain atomized liquid particles at ambient

temperature. This prevents condensation which typically occurs when a liquid is atomized by heating it to a higher

temperature.

The liquid particles which are atomizes with PureZone Machine are smaller than 5µm and do not easily settle on

surfaces they encounter. Hence, they will fully propagate in the A/C system and in the vehicle cockpit.

Such a condition cannot be realized with traditional aerosol cans, as the size and the weight of their atomized particles

will lead to their prompt precipitation.

One sanitising treatment with PureZone Machine takes minimum 11 minutes at 20 °C and automatically stops once

minimum liquid level is reached.

At higher ambient temperature the treatment will take less time; at lower ambient temperature, instead, it will take

more time.

WARNING

Reproduction, even partial, in any form of this handbook without prior written consent by ERRECOM srl is strictly prohibited.

ERRECOM srl reserves the right to improve or modify its equipments at any time and without prior notice.

INTRODUCTION