Troubleshooting; Error Codes; Transport And Storage; Additional Information - Tunturi T85 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour T85:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
English
as the belt is used. Proper belt tracking is an owner responsibility
common with all treadmills.
‼ NOTE
Damage to the running belt because of incorrect running-belt
adjustments is not covered by the products warranty.

Troubleshooting

Despite continuous quality control, defects and malfunctions caused
by individual components may occur in the equipment. In most cases
it's unnecessary to take the whole device in for repair, as it's usually
sufficient to replace the defective part.
If the equipment does not function properly during use, contact your
Tunturi dealer immediately. Always give the model and serial number
of your equipment. Please state also the nature of the problem,
conditions of use and purchase date.
If you require spare parts, always give the model, serial number of
your equipment and the spare part number for the part you need.
The spare part list is at the back of this manual. Use only spare parts
mentioned in the spare part list.

Error codes

If the display shows an error code
(marked with "E" + number), restart the equipment and check
whether the display still shows the error code. If the display still shows
the error code, immediately contact the dealer.

Transport and storage

⚠ WARNING
Before cleaning and maintenance, remove the mains plug from
the wall socket.
Carry and move the equipment with at least two persons.
Make sure that there are no other persons or objects under the
equipment.
When folding the folding the equipment, make sure that you
hear the equipment lock into position to prevent the equipment
from dropping back down.
⚠ CAUTION
Before folding the equipment, make sure that the incline is 0%.
If the incline is not 0%, folding will damage the mechanism.
- Move the equipment as shown (fig. F3). Move the equipment
and carefully put the equipment down. Place the equipment on
a protective base to prevent damage to the floor surface. Move
the equipment carefully over uneven surfaces. Do not move the
equipment upstairs using the wheels, but carry the equipment by
the handlebars.
- Store the equipment in the upright position (fig. F1). Store the
equipment in a dry place with as little temperature variation as
possible.

Additional information

Packaging disposal
Government guidelines ask that we reduce the amount of waste
material disposed of in land fill sites. We therefore ask that you
dispose of all packaging waste responsibly at public recycling centres.
End of life disposal
We at Tunturi hope you enjoy many years of enjoyable use from your
fitness trainer. However, a time will come when your fitness trainer will
come to the end of its useful life. Under 'European WEEE Legislation
you are responsible for the appropriate disposal of your fitness trainer
to a recognised public collection facility.

Technical data

Parameter
Unit of measurement
Mains voltage
VAC
Mains frequency
HZ
Motor
HP
Speed
Km/H
Speed
Mph
Incline
Step
Length
Cm
(folded)
Length
Inch
(folded)
Width
Cm
Width
Inch
Height
Cm
(folded)
Height
Inch
(folded)
Weight
Kg
Weight
Lbs
Max. user weight
Kb
Max. user weight
Lbs
HR. receiver
Khz

Declaration of the manufacturer

Tunturi New Fitness BV declares that the product is in conformity with
the following standards and directives: EN 957 (HA), 89/336/EEC.
The product therefore carries the CE label.
12-2019
Tunturi New Fitness BV
Purmerweg 1
1311 XE Almere
The Netherlands

Disclaimer

© 2019 Tunturi New Fitness BV
All rights reserved.
The product and the manual are subject to change.
Specifications can be changed without further notice.
Check our website for the latest user manual version.
2 6
Value
210 ~ 240
50 ~ 60
2.5
5.5 Max.
0.5 ~16.0
0.3 ~ 10.0
0 ~ 15
193.0
(137.0)
76.0
(53.9)
82.5
32.5
149.0
(155.0)
58.7
(61.0)
117.0
257.9
150
330
5.3 Khz

Publicité

Table des Matières
loading

Table des Matières