Multi-Functional Support; Wall Mounting; Operation - LEVELFIX CL 200 Série Manuel D'utilisation

MULTI-FUNCTIONAL SUPPORT

1
2
3
1. Thread 1/4"
2. Laser fastening wheel
3. Thread 5/8"
4. Wallmounting
5. Magnets
The laser has a 1/4 "connection. In order to mount the
laser on a tripod with 5/8 "connection, the laser must
be placed completely on the tripod with the mounting
foot.
4
5

OPERATION

To begin, unlock the compensator by turning the
release button (6 fig 1).
Keep pressing the ON button until you reach the
desired mode:
- 1x : level mode / horizontal line
- 2x : level mode / vertical line
- 3x : cross mode
- 4x : point mode
(only CPL206R/CPL206G)
- 5x : cross + point mode
(alleen CPL206R/CPL206G)
Press the Pulse button (10 fig 2) once to use the laser
with a detector.
When the laser is unlocked and outside of its com-
pensationrange (±4°), the lines and/or points will flash
rapidly.
To use the laser in automatic mode, make sure that it is
locked (LED 12 fig 2 switched off).
To switch off the laser, press and hold the ON button
for 2 seconds.
EN
17