Multi-Functional Support; Operation - LEVELFIX CCL200 Serie Manuel D'utilisation

MULTI-FUNCTIONAL SUPPORT

(depends on the model)
2
for CCL260G
1. Quick connect adaptor
Positioning knob
2.
3.
Adjustable cams (for tiles or profiles)
4. Thread 1/4"
5.
Thread 5/8"
1
2
3
1. Thread 1/4"
2. Laser fastening wheel
3. Thread 5/8"
Wallmounting
4.
5. Magnets
The laser has a 1/4 "connection. In order to mount the
laser on a tripod with 5/8 "connection, the laser must
be placed completely on the tripod with the mounting
foot.
1
3
3
5 4
4
5
for CCL210G
2
To begin, unlock the compensator by sliding the
release buttonto the right.
Keep pressing the ON button until you reach the
desired mode:
- 1x : level mode / horizontal line
- 2x : all lines
- 3x : horizontal and 1 vertical line
- 4x : 1 vertical line
- 5x : 2 vertical lines
Press the Pulse button (10 fig 2) once to use the laser
with a detector.
When the laser is unlocked and outside of its com-
pensationrange (±4°), the lines and/or points will flash
rapidly.
To use the laser in automatic mode, make sure that it is
locked (LED 12 fig 2 switched off).
To switch off the laser, press and hold the ON button
for 2 seconds.

OPERATION

EN
17