Symbols; General Safety Instructions; Laser Safety Instructions - LEVELFIX CL 200 Série Manuel D'utilisation

EN
GENERAL HAZARD WARNING
READ THE MANUAL
LASER WARNING

GENERAL SAFETY INSTRUCTIONS

1. Please read this user manual carefully before starting up
the laser.
2. Do not look directly into the laser beam. The laser must
be set up either above or below eye level.
3. Do not point the laser towards people or animals.
4. Keep the laser out of the reach of children.
5. Do not remove the safety labels.
6. Do not shake or drop the device as this could damage it.
7. Do not leave the device in an explosive atmosphere.
8. Always transport the laser in its case.
9. Always clean the device with a soft dry cloth.
10. Do not open the device or attempt any work on the
equipment.
11. Laser maintenance and repair must only be done by a
specialist company.
14

SYMBOLS

All devices are checked and shipped in perfect
condition, but should any impact occur, a device
may lose precision.
The user must regularly check the precision of
the machine, particularly before carrying out
substantial work.
Levelfix company shall accept no responsibility
for problems regarding the construction,
installation, manufacture or assembly which may
result from improper use of the device.

LASER SAFETY INSTRUCTIONS

This means that the device may be used with no addi-
tional safety precautions.
Eyes are normally protected by aversion responses and
the blink reflex.
The laser class 2 warning label is located on the device.
Do not remove any of the labels from the tool.
IMPORTANT!
LASER RADIATION
DO NOT LOOK INTO THE BEAM
CLASS 2 LASER DEVICE
The use of measurements and procedures other than
those specified here may lead to dangerous exposure
to radiation.
LASER CLASS 2