Symbols - Homelite UT47100 Manuel D'utilisation

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Eye Protection
Wet Conditions Alert
Electric Shock
No Slope
Keep Children and
Bystanders Away
Ricochet
Cutting Hazard
Cutting Hazard

SYMBOLS

MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates important information not related to an
injury hazard, such as a situation that may result in property damage.
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's
manual before using this product.
Always wear eye protection marked to comply with ANSI Z87.1.
Do not expose to rain or use in damp locations.
Failure to use in dry conditions and to observe safe practices can
result in electric shock.
Do not operate on inclines greater than 15º. Work across the face of
slopes, never up and down.
Keep all children and bystanders at least 50 ft. away.
Thrown objects can ricochet and result in personal injury or property
damage.
Keep feet and hands away from rotating tines.
Keep feet and hands away from rotating tines.
Page 5 — English
DESIGNATION/EXPLANATION