Sharp LL-T15V1 Mode D'emploi page 20

MODE SELECT Menu
M OD E SELECT
OS D H -POS I T I ON
OS D V - POS I T I ON
4 0 0 L I NE S
S C AL I NG
L A NGU AGE
1 0 2 4 X 7 6 8
V : 7 5 H z H : 6 0 . 0 k H z
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option:
- When adjustment complete: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to the
left and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up
and down. ( buttons)
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-
line screen when using US text, etc.
( buttons)
640: 640 X 400 dot mode
720: 720 X 400 dot mode (US text etc.)
Note:
- As the resolution input for other than 400 lines is
done automatically, there is no need to set it.
SCALING (Level of scaling)
The sharpness of the image can be adjusted. (
buttons)
Note:
- When the display mode is set to less than
1024 x 768 pixels, the display is enlarged to
cover the whole screen (i.e. the side ratio of the
display may change).
- If a resolution of 1024 x 768 pixels cannot be
achieved even after expansion is attempted, the
screen's perimeter will display black. (This is not
a malfunction.)
Adjusting the screen display
LANGUAGE
Messages displayed on the screen and OSD Menu
contents can be changed to the following languages.
Dutch, English, French, German, Spanish, Italian,
640 720
Swedish.
3
1. Press the
2. Use the SELECT button to choose a language.
3. Press the MENU button or the
SELECT button
20
button.
The Language Selection Menu will be displayed
on the screen.
The setting is complete.
button.