Servicing - Dualit 30076 Mode D'emploi

2009.03.17_Vario toaster manual.qxp
CLEANING
• Unplug the toaster and allow to
cool down before cleaning.
• Remove the crumb tray and clean
daily.
• Crumbs should be carefully
brushed off the elements (using
only a soft brush), the toaster
turned upside down and shaken
out.
• Never insert a fork or other sharp
instrument to remove torn pieces
of bread as the heating elements
may be damaged.
• Use a damp cloth to wipe off the
outside surfaces of the toaster. A
stainless steel polish can be used
to restore shine but this must not
an aggressive cleaner or contain
ammonia and should only be
used on the stainless steel cover.
• This appliance must not be
immersed in water or cleaned
with a water jet.
31/03/2009 13:44 Page 8

SERVICING

UK GUARANTEE
See enclosed guarantee card for full
details of the Dualit Guarantee.
Keep these instructions and purchase
receipt in a safe place, you will need
this if your toaster requires repair
under the gurantee.
This guarantee does not affect the
purchaser's statutory rights.
Further advice on using your Dualit
Vario, or other products in the Dualit
range, is available from:
Dualit customer care line on
+44(0)1293 652 500
Alternatively e-mail Dualit on
info@dualit.com or www.dualit.com
7
REPLACING ELEMENTS
Servicing must only be carried out
by a Dualit authorised service agent
or a competent qualified electrician.
For your own protection only use
original Dualit spares in your
toaster.
• When replacing Pro Heat
elements, only use genuine Dualit
elements (stamped "DUALIT").
• The safety and the performance
of the toaster cannot be guaranteed
if inferior elements are used.
• Fitting of non Dualit parts will also
invalidate the guarantee.