Selectors; Menus; Numerical Values; Title Bar - Ecler DPM3003 Notice D'emploi

5.4. Selectors

Some parameters are set using drop-down value lists.
These controls display a down arrow on their right.
In order to choose a new value in the list, click on the
control and a list will appear with all available values. Select the
new value by left-clicking on it. The list will close and the control
will be set with the new value.

5.5. Menus

Menus are graphic objects operating like selectors.
The only difference is that menus may have some greyed ("non-
available") items (depending on the current mode).

5.6. Numerical values

In .amiclab-m3 several already mentioned controls have a
combined display for numerical values. This display also allows editing of
the parameter value.
In order to edit a numerical value, you just have to point and left-
click on it. The control automatically enters the edit mode allowing to type
the desired value on keyboard (only numbers, don't type units).
Once editing is done, press ENTER to update the control. Pressing ESC cancels the editing and
the previous value is kept.

5.7. Title bar

The Title bar is a typical Windows® program title bar. Edited preset name appears on far left
(here working.am3). Buttons on far right of the title bar minimize and maximize the window, and exit
program. The program name is written near these buttons.
The title bar (except the buttons surface) may be used to move the rack anywhere on the screen
(cursor displays as crossed arrows).
In addition to the exit button, Windows® standard Alt+F4 key shortcut can be used to quit the
program.
10