HRD (D)-FUF
6
Installation:
Place the flange conduit in the desired position and fasten
1
to the reinforcement.
Close the shuttering.
Keep a distance of 300-500 mm around the edges.
Concrete the flange conduit.
2
Using a suitable vibration device, make sure that the
concrete is well-compacted around and between the
flange conduit.
Once the concrete has set, the shuttering can be removed.
3
Using suitable auxiliaries, recess or punch out the waterproof
4
sheeting around the entries and threaded holes, cut to size
(use the loose flange as a template), and fasten to the
flange conduit.
25
GB