Dipping The Measuring Cell Into The Sample; Measuring; Saving The Results - Mettler Toledo Refracto 30P Mode D'emploi

Measurement (measure)
6.3

Dipping the measuring cell into the sample

- Immerse the measuring cell completely in the sample.
- Caution: Never immerse the instrument deeper into the sample than the indi-
cated line. The instrument is only resistant to splashed water.
6.4

Measuring

The procedure is dependent upon the settings in the menu, see chapter 5.4
Measuring without temperature-compensation coefficients (α):
- Press the ok/measure key to start the measurement.
Measuring with temperature-compensation coefficients (α) (nDt or Conc. on
the display):
- Press the key until a previously saved temperature-compensation coeffi-
cient appears in the display, e.g.
- Select the desired coefficient using the
- Confirm the selected coefficient with the ok/measure key.
- Press the ok/measure key to start the measurement.
6.5

Saving the results

The instrument can save up to 1100 results internally. Each time a result is
saved, the sample number increases by one.
The symbol appears in the display: Saving all results automatically
The instrument saves all results automatically. After the measurements, as soon
as the result is saved, Ready appears on the display.
12
.
and keys.
METTLER TOLEDO Refracto 30P