System Functions - Honeywell evotouch Mode D'emploi

System functions

Zoning
You can independently control the temperature in individual rooms,
or groups of rooms, according to different schedules. This allows
you to optimise comfort and minimise energy usage, reducing your
fuel bills.
Domestic hot water
The domestic hot water setpoint temperature can be set and
controlled by the time schedule.
Optimisation
Your control system has several Optimisation functions. These
functions aim to save energy while making you as comfortable as
possible. Optimisation can be activated individually for each zone.
Optimum start works by measuring how quickly your system
normally heats. evotouch will calculate the correct time to start
heating, so that you reach your comfort temperature when you want
it.
The times you set are the times when you want the heating to
be at a desired temperature. The system will start heating the
zone early to meet it's time schedule.
4
Delayed start works by using the normal programmed start times,
comparing the current temperature with the set temperature
and delaying the start a little depending on how close these
temperatures are to each other.
Optimum stop saves energy and money by switching off a little
bit earlier than the normal programme time. If your home is up to
temperature, you will not notice the effect on the temperature, but
you will see a difference in your fuel bill.
Optimisation only applies to your heating.
Special day
The special day function provides 2 independent time programs
with daily schedule for up to 99 days for specific purposes, e.g.
early and late shift program.
Future expansion
evotouch is in an expandable system. An upgrade port on the
controller allows your installer to update the unit to take advantage
of future developments and new functionality.