Operation - Husqvarna HD800BBC Manuel De L'opérateur

The operation of any lawn mower can result
in foreign objects thrown into the eyes, which
can result in severe eye damage. Always
wear safety glasses or eye shields while
operating your lawn mower or performing
any adjustments or repairs. We recommend
standard safety glasses or a wide vision safety mask over
spectacles.
HOW TO USE YOUR LAWN MOWER
THROTTLE / ENGINE CONTROL
The engine is controlled by a throttle control located on the
side of the upper handle. CHOKE position is for starting a
cold engine; FAST position is for starting a warm engine,
normal cutting, trimming and better grass bagging; SLOW
position is for light cutting, trimming and fuel economy,
and STOP position is for stopping the engine (Figure 6).
1. Choke
2. Fast
3. Slow
4. Stop
BLADE CONTROL
IMPORTANT: Allow a cold engine to warm up in high idle
position for one minute before engaging the blade.
CAUTION: When the blade control is engaged,
the blade turns.
IMPORTANT: Do not start the blade in uncut grass. Move
the mower out of uncut grass before starting the blade.
CAUTION: Federal regulations require this blade/
brake control to minimize the risk of blade contact
injury. Do not under any circumstances attempt
to defeat the function of this control.

OPERATION

4
3
2
1
Figure 6
1. To start the blade, hold the operator presence control
bar down to the handle and push the blade/brake
control lever forward until it latches (Figure 7).
NOTE: It is normal to hear the belt slip as the blade is
engaged and comes up to speed.
1
TO ENGAGE BLADE
1. Operator presence control bar
2. Blade brake/clutch control
2. To stop the blade, release the operator presence control
bar (Figure 8).
IMPORTANT: Do not pull the blade/brake lever rearward
with the operator presence control bar down against the
handle.
BLADE DISENGAGED
1. Operator presence control bar
2. Blade brake/clutch control
7
2
Figure 7
1
2
Figure 8