Verifying A Position (Ver/ Set Key); Setting Up A Position (Ver / Set Key) - Novag star opal Mode D'emploi

Wait until you have executed the computer's reply move. Press TAKE BACK and the rank
and file LEDs will show the computer's last move in reverse, e.g. first the "to" square and then
the "from" square. Execute this move just as any ordinary one, i.e. applying pressure on both
squares. Press TAKE BACK again and the rank and file LEDs will now show your last move
in reverse. Proceed as explained above.
The rank and file LEDs of this square will indicate the square position of a captured piece.
Simply reinstate the captured piece by applying pressure onto this square. You may then
continue to take back moves if so desired.
Note: If you select the COLOR or SET UP function to alter the position of any of the pieces,
all prior moves will be deleted and you may not TAKE BACK moves before the
change of COLOR or position.
11. VERIFYING A POSITION
(Ver / Set Key = Verify / Set Up Key)
Any time before entering your next move or after setting up a board position you can check the
position of any number of pieces to see if the board position corresponds to the position stored
in the computer memory.
•
Press the VERIFY / SET UP key once, the VERIFY LED lights up.
•
The BLACK or WHITE LED will be on, indicating the color of pieces that can be
verified. Pressing the COLOR key can change the color.
•
Select the type of piece(s) to be verified by pressing the key marked with the symbol of the
piece.
•
To end the procedure press the GO key.
Everytime you press a symbol key the respective rank and file LEDs will light up to verify the
board position of the chess piece(s) in question. Pressing the symbol key repeatedly will scan
through all pieces of this type from left to right. After all those pieces have been called off press
the symbol key once more. All rank and file LEDs are off, meaning that no further pieces of
this kind are on the board and in the computer's memory. You can now call off the next type of
pieces.
To end the verification at any time simply press the GO key.
12. SETTING UP A POSITION
(Ver / Set Key = Verify / Set Up Key)
You can go into SET UP mode at the beginning of a new game or during a game before you
enter your next move.
14