First Step; Adjusting The Clock - Kenwood KDC-X996 Guide De Démarrage Rapide

First step

Exiting the Demonstration mode
Turn off the Demonstration mode when
you use the unit for the first time after
installation.
1
Press the [VOL] knob to quit the
Demonstration mode when the message
"To Cancel Demo Press the volume knob"
is displayed (approx. 15 seconds).
2
Turn the [VOL] knob to select "YES", and
then press the [VOL] knob.
The Demonstration mode can also be
canceled in the Menu List mode.
Refer to <Demonstration mode Setting>
(page 43) in Instruction manual.

Adjusting the Clock

1
Press the [MENU] button to enter the
Menu List mode.
2
The item can be selected and
determined as follows.
"Settings" "Clock & Date"
➜
Adjust"
To select the item, turn the [VOL] knob.
To determine the item, press the [VOL]
knob.
3
Turn the [VOL] knob to select hour or
minute, and then press the [VOL] knob.
4 | Quick Start Guide
[MENU]
"Clock
➜
[VOL]
4
Turn the [VOL] knob to adjust the hour
and minute.
To determine the item, press the [VOL]
knob.
5
Press the [MENU] button to finish the
clock adjusting.
6
Turn the [VOL] knob to select "Date
Adjust", and then press the [VOL] knob.
7
Turn the [VOL] knob to select month,
date, or year, and then press the [VOL]
knob.
8
Turn the [VOL] knob to adjust the
month, date, and year.
To determine the item, press the [VOL]
knob.
9
Press the [MENU] button to finish the
date adjusting.
10
Turn the [VOL] knob to select "Date
Mode select", and then press the [VOL]
knob.
11
Turn the [VOL] knob to select Date
format, and then press the [VOL] knob.
12
Press the [MENU] knob for at least 1
second, and then press it again briefly to
exit the Menu List mode.