First Step - Kenwood PANDORA KDC-X995 Guide De Démarrage Rapide

First step

Exit Demonstration Mode
Turn off the demonstration mode
when you use it for the first time after
installation.
1
Press the [VOL] knob to quit the
demonstration mode when the
messages "To Cancel Demo Press the
volume knob" are displayed (approx. 15
seconds).
2
Turn the [VOL] knob to select "YES", and
then press the [VOL] knob.
The demonstration mode can also be
canceled in the Menu List mode.
Refer to <Demonstration mode Setting>
(page 38) of Instruction manual.
Adjusting the Clock & Date
1
Press the [MENU] button to enter the
Menu List mode.
2
The item can be selected and
determined as follows.
➜
"Settings" "Clock & Date"
Adjust"
To select the item, turn the [VOL] knob.
To determine the item, press the [VOL]
knob.
3
Press [4] or [¢] button to select
hour or minute to set.
4
Turn the [VOL] knob to adjust the hour
and minute.
4 | Quick Start Guide
[MENU]
[ 4 ] [ ¢ ]
➜
"Clock
[VOL]
5
Press the [MENU] button to finish the
clock adjusting.
6
Turn the [VOL] knob to select "Date
Adjust", and then press the [VOL] knob.
7
Press [4] or [¢] button to select
month, date, or year to set.
8
Turn the [VOL] knob to adjust the
month, date, and year.
9
Press the [MENU] button to finish the
date adjusting.
10
Turn the [VOL] knob to select "Date
Mode select", and then press the [VOL]
knob.
11
Turn the [VOL] knob to select Date
format, and then press the [VOL] knob.
12
Press the [MENU] knob for at least 1
second, and then press it again briefly to
exit the Menu List mode.