Operation; Power Adapter; Operation Modes - VOLTCRAFT IPC-1L Notice D'emploi

4. oPEratIoN

a) Power adapter
Insert the low voltage plug of the power adapter to the power receptacle.
Plug the power adapter to wall outlet.
When the power adapter has been plugged to the power source, all the segments will light
up momentarily and the "null" icon will be shown before batteries are placed. If damaged
batteries are placed to the charger, the "null" icon will be displayed on the display.
b) operation modes
The intelligent battery charger provides four different operating modes:
•
•
•
•
Charging mode (CHARGE)
Charge up the rechargeable battery, automatically switch to trickle
charge after rechargeable battery is full.
Discharging mode (DISCHARGE)
Discharge the rechargeable battery before charging it for minimizing
the memory effect.
Refresh mode (REFRESH)
Refresh the rechargeable battery to its maximum capacity by charging
and discharging the rechargeable battery repeatedly. This process may
bring the rechargeable battery back to the optimum condition for old
rechargeable batteries or those have not been used for a long time.
Test mode (TEST)
Check the rechargeable battery capacity (mAh). The battery capacity
determined in the test mode refers to the capacity being discharged
after fully charged. If the battery capacity is lower than the battery's
rating, the battery may reach the end of its useful life.
17