Important Safety Instructions - Deltec MCE 600 Instructions D'emploi

Masquer les pouces Voir aussi pour MCE 600:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11

IMPORTANT SAFETY INSTRUCTIONS

WARNING To guard against injury, basic safety precautions should be observed, including the following.
1) READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2) DANGER – To avoid possible electric shock, special care should be taken since water is employed in the
use of aquarium equipment. For each of the following situations, do not attempt repairs by yourself;
return the appliance to an authorized service facility for service or discard the appliance.
a) If the appliance shows any sign of abnormal water leakage, immediately unplug it from the power
source. (Immersible equipment only)
b) Carefully examine the appliance after installation. It should not be plugged in if there is water on
parts not interned to be wet.
c) Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning or has been
dropped or damaged in any manner.
d) To avoid the possibility of the appliance plug or
receptacle getting wet, position aquarium stand
and
tank
to
receptacle to prevent water from dripping onto
the receptacle or plug.
A "drip-loop", shown in the figure below, should
be arranged by the user for each cord connecting
an aquarium appliance to a receptacle. The "drip-
loop" is that part of the cord below the level of
the receptacle, or the connector if an extension
cord is used, to prevent water travelling along the
cord and coming in contact with the receptacle.
If the plug or socket does get wet, DON´T unplug the cord. Disconnect the fuse or circuit breaker
that supplies power to the appliance. Then unplug and examine for presence of water in the
receptacle.
3) Close supervision is necessary when any appliance is used by or near children.
4) Always unplug an appliance from an outlet when not in use, before putting an or taking off parts, and
before cleaning. Never yank cord to pull plug from outlet. Grasp the plug and pull to disconnect.
5) Do not use an appliance for other than intended use. The use of attachments not recommended or sold
by the appliance manufacturer may cause an unsafe condition.
6) Make sure an appliance mounted on a tank is securely installed before operating it.
7) Read and observe all the important notices on the appliance.
8) If an extension cord is necessary, a cord with a proper rating should be used. A cord rated for less
amperes or watts than the appliance rating may overheat. Care should bee taken to arrange the cord
so that it will not be tripped over or pulled.
9) This appliance has a polarized plug (one blade is wider than the other). As safety feature, this plug will
fit in a polarized outlet only one way. If the plug does not fit, contact a qualified electrician. Never use
with an extension cord unless plug can be fully inserted. Do not attempt to defeat this safety feature.
Exception: This instruction may be omitted for an appliance that is not provided with a polarized
attachment plug.
one
side
of
a
wall-mounted
Removing of the plug invalidates the warranty!
SAVE THESE INSTRUCTIONS

Publicité

Table des Matières
loading

Table des Matières