Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Modello - Modèle - Model
Modell
Fabbricante - Constructeur
Manufacturer - Hersteller
MAINTENANCE TECHNICIAN PROFILE
Creation, enabling and disabling of the maintenance accounts take place directly on the collection terminal.
Access to maintenance mode is exclusively reserved for Epta and its partners.
The main functions of the MAINTENANCE TECHNICIAN PROFILE are:
•
Software configuration
•
Upgrade
•
Version number
•
Display of the last pings with network and hardware
•
Change the volume
•
Report for order
•
Doors selection
•
Display the log and the events on the doors
•
Kiosk report: Kiosk log display
•
Enable/disable a door
•
Opening of all doors.
Contact the support service, if you need one of the items listed above.
WARNING!
The door lock is equipped with a magnetic stop; if the door is opened, opening is signalled with an alarm.
If the lock is broken, the master column will signal the door is "NOT ACTIVE".
14. MALFUNCTION AND REMEDIES
Most of the functioning inconveniences are generally due to simple causes or to defective electrical connections.
These problems can usually be solved on site.
POSSIBLE CAUSE
Check that there is voltage at the wall socket
Check that the cable is properly plugged
Controllare che il cavo di alimentazione non sia rotto
If power failure is not due to any of the above causes, call the nearest after-sales service immediately, empty the cabinet and store the
foods in coldrooms or refrigerators that may ensure their preservation temperature.
POSSIBLE CAUSE
Check that the unit is not adjacent to sources of heat
Check the temperature setting
If failure to cool should is not due to any of the above reasons it it persists on even after the above checks, resort to the nearest after-sales
service.
POSSIBLE CAUSE
Check that all the bolts and nuts are properly fastened
Check that the unit is placed on an even surface
Check if any pipe or fan is in contact with any other part of the body
Should the inconvenience persist, contact the nearest after-sales service.
EPTABRIKS INDOOR
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
THE COLUMN DOES NOT WORK
THE INTERNAL TEMPERATURE IS NOT COLD ENOUGH
THE UNIT IS NOISY
SOLUTION
Reset the corresponding thermal-
magnetic device, to the internal side
of PILOT column
Reset the connection inside the PILOT
column
Replace the cable
SOLUTION
Position the equipment correctly
Set the correct temperature
SOLUTION
Screw in the screws
Position the equipment correctly
Switch off the counter and distance
the parts in contact in the event the
problem persists, contact the support
service.
2 7 / 7 2
PAGE
UM000418
N° DOC
AUTHORISED STAFF
Technical support
Technical support
Technical support
AUTHORISED STAFF
Technical support
Technical support
AUTHORISED STAFF
Technical support
Technical support
Technical support
Publicité
Table des Matières
