EPTA EPTABRICKS INDOOR TN Instructions Pour L'utilisateur page 18

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Modello - Modèle - Model
Modell
Fabbricante - Constructeur
Manufacturer - Hersteller
2.
RESTRICTIONS AND INFORMATION
The equipment cannot be positioned in environments in which explosive
gas substances are present.
It's must important that the compressor unit, situated on the upper part
of the column, is always covered by a protection roof. Don't leave exposed
directly to the rainfall and to the bad weather.
It is strictly forbidden to insert pharmaceutical products in the equipment.
Do not remove the guards that require use of tools for removal.
DO NOT climb on the upper part of the equipment and DO NOT LOAD IT
in any way with boxes or various types of objects.
The equipment is not suitable to support liquid spillages on top of it. For
this reason, do not rest or position containers of liquid on it.
3.
DOOR OPENING AND LOADING
10 Cm
10 Cm
10 Cm
EPTABRIKS INDOOR
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
WARNING!
MAXIMUM ANGLE OF DOOR
OPENING = 110°
For correct operation and to avoid any structural failure
and/or problems, you need to avoid force opening the
doors at an angle over 110°.
WARNING!
The product can be positioned stopped
on the base of the tank.
WARNING!
FOR
GOOD
PRESERVATION,
APPROX. 10 CM DISTANCE FROM
THE UPPER PART OF THE DOOR
COMPARTMENT.
PRODUCT
ALWAYS
KEEP
1 8 / 7 2
PAGE
UM000418
N° DOC

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Eptabricks indoor btEptabricks indoor dry

Table des Matières