Aerogen Solo Mode D'emploi page 214

Table 15.
Guidance and manufacturer's declaration - electromagnetic immunity for
the Aerogen USB Controller system that is not life supporting (Continued)
Immunity Test
Radiated RF
IEC 61000-4-3
EN 61000-4-3:
2010
210
IEC 60601 Test Compliance
Level Level
10 V/m 10 V/m
80 MHz to 2.7 GHz 80 MHz to
27 V/m, 18 Hz PM 2.7 GHz
385 MHz 27 V/m, 18
Hz PM
28 V/m, 50 %18 385 MHz
Hz PM
450 MHz 28 V/m, 50 %18
Hz PM
9 V/m, 217 Hz PM 450 MHz
710 MHz
9 V/m, 217
9 V/m, 217 Hz PM Hz PM
745 MHz 710 MHz
9 V/m, 217 Hz PM 9 V/m, 217
780 MHz Hz PM
745 MHz
28V/m, 18 Hz PM
810 MHz 9 V/m, 217
Hz PM
28 V/m, 18 Hz PM 780 MHz
870 MHz
28V/m, 18
28 V/m, 18 Hz PM Hz PM
930 MHz 810 MHz
28V/m, 217 Hz PM 28 V/m, 18
1720 MHz Hz PM
870 MHz
28 V/m, 217 Hz PM
1845 MHz 28 V/m, 18
Hz PM
28 V/m, 217 Hz PM 930 MHz
1970 MHz
28V/m, 217
27 V/m, 217 Hz PM Hz PM
2450 MHz 1720 MHz
9V/m, 217 Hz PM 28 V/m, 217
5240 MHz Hz PM
1845 MHz
Electromagnetic
Environment - Guidance
d = [1.17] √P... 80MHz to 800MHz
d = [2.33] √P... 800MHz to 2.5GHz
where P is the maximum output
power rating of the transmitter
in Watts (W) according to the
transmitter manufacturer and d is the
recommended separation distance in
metres (m).
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey,ª should be
less than the compliance level in each
frequency range.
Interference may occur in the vicinity
of equipment marked with the
following symbol:
Aerogen
®
b