Aerogen Solo Mode D'emploi page 209

Appendix 1: EMC Tables
Für andere Sprachen wenden Sie sich bitte an den Hersteller.
Pour d'autres langues, veuillez contacter le fabricant.
Per altre lingue contattare il produttore.
Neem contact op met de fabrikant voor andere talen.
W celu uzyskania tabel w innym języku należy skontaktować się
z producentem.
The following tables are provided in accordance with IEC/EN 60601-1-2:
Table 12. Guidance and manufacturer's declaration – electromagnetic emissions
The Aerogen USB Controller system is intended for use in the electromagnetic
environment specified below. The customer or the user of the Aerogen USB Controller
system should assure that it is used in such an environment.
Emissions test
RF Emissions
Conducted and Radiated
CISPR 11
EN 55011: 2009 + A1: 2010
RF Emissions
Conducted and Radiated
CISPR 11
EN 55011: 2009 + A1: 2010
Harmonic emissions
IEC 61000-3-2
EN 61000-3-2: 2014
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
EN 61000-3-3: 2013
Compliance Electromagnetic Environment -
Guidance
Group 1 The Aerogen USB Controller system uses
RF energy only for its internal function.
Therefore, its RF emissions are very low
and are not likely to cause any interference
in nearby electronic equipment.
Class B The Aerogen USB Controller system is
suitable for use in all establishments,
including domestic establishments and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
Not
purposes.
Applicable
Not
Applicable
Aerogen
®
205