NORAUTO ESSENTIAL Mode D'emploi page 130

Connecting the charger and charge the Battery with the Battery Clamps
IMPORTANT: Before start connecting, unplug the battery Charger AC cord from the AC
outlet. Disconnect the battery clamps from the unit at output cord connector.
The charger's battery clamps are color-coded (RED-POSITIVE and BLACK-NEGATIVE).
1 - Connect the RED POSITIVE clamp to the POSITIVE
post of the battery.
2 - Connect the BLACK NEGATIVE clamp to the
NEGATIVE post of the battery.
Connect the battery clamp connector to the unit
connector, as far away from the battery as possible.
Plug the unit onto the power socket.
1
2
3
To Start the Charging
* The charger remains in Float Charge Mode as long
as the charger is connected to the battery and is
plugged into a functioning AC mains socket.
Press CHARGER button, to select the charging voltage
mode (6V or 12V) according to the battery voltage.
Attention: Please wait for few seconds to toggle the
6V or 12V charging mode by pressing the button.
130
4