JVC BR-DV3000E Mode D'emploi page 58

MENU SCREEN
SYSTEM menu
Items
INDEX WRITE
REPEAT MODE
NEXT PAGE
PAGE BACK
SYSTEM (2/2) menu
Items
DC IN MODE
OPERATION
LOCK
PAGE BACK
E-58
BR-DV3000_E_p50-71
Contents of the menus
–
(continued)
Setting
OFF Use this setting to enable/disable index signal recording:
ON OFF : No recording of index signal.
ON : Use this setting to record index signals. An index signal is
automatically registered at the position where recording
starts.
OFF Use this setting to enable/disable repeat playback:
INDEX OFF
VIDEO OUT INDEX
TAPE END
VIDEO OUT : Repeat playback from the beginning of the tape to
TAPE END
Display the SYSTEM (2/2) menu.
Return to the top MENU.
Setting
OPE OFF Select the action to perform when power is supplied via the DC IN
OPE ON terminal:
PLAY OPE OFF : Sets the unit to OPERATE OFF.
OPE ON : Sets the unit to OPERATE ON.
PLAY : If a tape has been inserted, the VTR will go into the
PLAY mode. (AUTO PLAY)
OFF Turn ON/OFF the OPERATION LOCK:
ON OFF : Turns off the OPERATION LOCK and enables the buttons
on the main unit.
ON : VTR goes into the OPERATE LOCK mode. The buttons and
the slide switch on the main unit are inhibited. However,
OPERATE ON and menu operations are still possible.
Memo
Even when this setting is OFF, disabling the buttons on the main
unit while it is controlled via a remote controller connected to the 9
PIN REMOTE or SERIAL REMOTE terminal is possible, by setting
the LOCAL FUNCTION item of the REMOTE menu.
Return to the SYSTEM (1/2).
58
Contents
: No repeat playback.
: Repeat playback between the positions where in-
dex signals are recorded.
the position where recording of video signals ends.
: Repeat playback from the beginning to the end of
the tape.
Contents
13/01/03, 11:39 AM
– (continued)