Mercedes Sprinter (906)/ Vw Crafter Till 2017 - Dometic Frigo Instructions De Montage

Installing condenser
A
CAUTION!
For safety reasons when drilling, note the location of existing wiring harness-
es, wires and other components, in particular those which are not visible The
respective components are to be fitted so as not to create a risk of injury for
vehicle occupants (e.g. due to sharp edges) and not to impair the function of
safety features!
➤ Attach the hose lines and lay across the
heat shield towards the front.
8.3

Mercedes Sprinter (906)/ VW Crafter till 2017

I
NOTE
The installation steps below are an example for similar vehicles.
A
CAUTION!
z Install the condenser unit in a tilted position in order to guarantee sufficient
cooling!
z For safety reasons when drilling, note the location of existing wiring har-
nesses, wires and other components, in particular those which are not
visible The respective components are to be fitted so as not to create a risk
of injury for vehicle occupants (e.g. due to sharp edges) and not to impair
the function of safety features!
Frigo
19