Querying The Hours Of Operation And The Number Of Centrifugation Runs - Hettich EBA 280 Mode D'emploi

EN
20.8

Querying the hours of operation and the number of centrifugation runs

The hours of operation are divided into internal and external hours of operation.
Internal hours of operation: Total time the device was switched on.
External hours of operation: Total time of the previous centrifugation runs.
With the rotor at a standstill, the query can proceed as follows:
The procedure can be aborted at any time by pressing the
 Press and hold the button for eight
seconds.

 Press the key until the following is
displayed:

 Press the key.
START
TimeExt : External hours of operation.
PULSE

 Press the key.
TimeInt : Internal hours of operation.

 Press the key.
Starts : Number of all centrifugation runs.

 Press the key twice to exit the "
STOP
Cycles" menu or press three times to exit
OPEN
the " MACHINE MENU ".
76/166
STOP
key.
OPEN
PROG RPM
PROG RPM
Example:
PROG RPM
Example:
PROG RPM
Example:
PROG RPM
Time &
PROG RPM
Rev. 03
t/min:s
t/min:s
t/min:s
t/min:s
t/min:s
Example:
t/min:s PROG RPM
AB1101DEENFRIT
t/min:s