Eaton PORTFOLIO LDRT4B Instructions D'installation page 2

Led retrofit commercial encastré
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Installation Instructions – LDRT4B/LDRT6B/LDRT67B Commercial Recessed LED Retrofit
Retro-fit Kit Contents:
• Retrofit Ring Assembly
• Retrofit Driver Assembly
• Portfolio LED Module (Sold Separately)
• Portfolio LED Reflector (Sold Separately)
Tools Required (optional):
• Flathead screwdriver (from others)
INSTALLATION
Retrofit Driver Assembly
For Horizontal Compact Fluorescent Housingse:
Connecting the module and trim
Attach reflector to LED module using thumb screws.
Installing this assembly in the ceiling
1.
Remove existing reflector/trim and lamp (Figure 1).
2.
Remove reflector mounting hardware from mounting
bracket (Figure 2).
3.
Locate junction box, remove ballast/junction box cover
and disconnect supply wires (120 or 277). Disconnect
connections to insulation detector if any. Disconnect all
wires from the socket to the ballast (wire colors may
vary) (Figure 3).
4.
Remove one 7/8" diameter (1/2" trade size conduit)
knockout from junction box, on top if possible.
5.
Place retrofit driver assembly through ceiling/housing
opening (Figure 4).
6.
Lay retrofit driver assembly away from ceiling/housing
opening with driver side up (Figure 5).
7 .
Leave flexible conduits from retrofit driver assembly
hanging down out of ceiling/housing opening.
8.
Feed supply wires from retrofit driver assembly
through knock-out that was removed in junction box
and insert snap-in connector into junction box
(Figure 6).
9.
Reconnect supply wires in junction box to leads from
retrofit driver assembly: black wire to line, white wire
to neutral, green wire to ground and any dimming leads
as necessary (see Wiring Diagrams).
10. Replace ballast/junction box cover to completely close
junction box.
2
Installation Instructions – LDRT4B/LDRT6B/LDRT67B Commercial Recessed LED Retrofit
IB520015EN
Retrofit
Assembly
Portfolio LED Module (Sold
Separately)
Adapter Ring
(Optional)
Figure 1
Figure 3
Figure 5
www.eaton.com
Retrofit Ring
Assembly
Portfolio LED
Reflector (Sold Separately)
Figure 2
Figure 4
Figure 6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Portfolio ldrt6bPortfolio ldrt67bPortfolio ldrt4b15d010

Table des Matières