Eaton LUMARK WPSLED Instructions D'installation

IB514012EN
Installation Instructions - WPSLED
Instructions d'installation - WPSLED
Instrucciones de instalación - WPSLED
WARNING
Make certain power is OFF before starting installation
or attempting any maintenance. Risk of fire/electric
shock. If not qualified, consult an electrician.
WARNING
Risk of Electric Shock—Disconnect power at fuse or
circuit breaker before installing or servicing.
WARNING
Risk of Burn—Disconnect power and allow fixture to
cool before servicing.
WARNING
Risk of Personal Injury—Fixture may become damaged
and/or unstable if not installed properly.
IMPORTANT: Read before installing fixture. Retain for future reference.
SAFETY: This fixture must be wired in accordance with the National Electrical Code and applicable local codes and
ordinances. Proper grounding is required to insure personal safety. Carefully observe grounding procedure under
installation section.
WARNING
DO NOT mount luminaire within 6" of a combustible
surface. DO NOT handle luminaire by the glass.
N ote: These instructions do not claim to cover all
details or variations in the equipment, procedure,
or process described, nor to provide directions
for meeting every possible contingency during
installation, operation or maintenance. When
additional information is desired to satisfy a
problem not covered sufficiently for user's purpose,
please contact your nearest representative.
Specifications and dimensions subject to change
N ote:
without notice.
Brand Logo
reversed out of
black
INS # INS #