Error Message / Troubleshooting - Beurer medical BC 30 Mode D'emploi

Range of blood pressure values
Grade 3: Severe hypertension
Grade 2: Moderate hypertension
Grade 1: Mild hypertension
High-normal
Normal
Optimal
Source: WHO, 1999
The bar graph in the display and the scale on the unit indicate
the range of the blood pressure which has been recorded.
If the values for systolic and diastolic pressure are in two dif-
ferent WHO ranges (e.g. systolic in the "high-normal" range
and diastolic pressure in the "normal" range) the graphic
WHO classification on the unit indicates the higher range
("high-normal" in the example described).
6. Measurements
Save
• The results of every successful measurement are stored
together with the date and time. There are 3 user memo-
ries each with 40 memory spaces. If there are more than
40 measurements, the oldest measurements are lost.
Display
• Select the desired user memory (
pressing the function button SET.
• Press the memory button M. The average value of the last
three measurements is displayed first
Systolic (in mmHg) Diastolic (in mmHg)
≥180 ≥110
160-179 100-109
140-159 90-99
130-139 85-89
120-129 80-84
<120 <80
, or ) by
.
18
Measure
Seek medical advice
Seek medical advice
Have it checked regularly by doctor
Have it checked regularly by doctor
Check it yourself
Check it yourself
• If you continue to press the memory button M, the most
recent individual measured values are displayed in turn
with the date and time.
Delete
• To clear the memory of the relevant user memory, you
must first select a user memory. Start a request for either
average values or individual measured values and press
the setting button MODE and the function button SET at
the same time.
• All the values in the current user memory are deleted.
appears on the display.
The device switches off automatically after 1 minute.

7. Error message / troubleshooting

In the event of errors, the error message
display.
Error messages may appear in the following cases:
• : the cuff is incorrectly fastened, or you move or speak
during the measurement,
appears on the