Measuring Blood Pressure - Beurer medical BC 30 Mode D'emploi

Note: You will find these markings on batteries
containing harmful substances: Pb = battery
containing lead, Cd = battery containing cad-
mium, Hg = battery containing mercury.
Setting the date and time
This menu allows you to set the following functions, one after
another:
Year Month Date
It is essential to set the date and time. Otherwise, you will not
be able to save your measured values correctly with a date
and time and access them again later.
The time is displayed in the 24-hour format.
If you press and hold the function button SET, you can
set the values more quickly.
• Press the setting button MODE. The year flashes on the
display.
• Set the year with the function button SET and confirm with
the setting button MODE.
• Set the month, day, hour and minutes and confirm each
setting with the setting button MODE.
If you wish to change the date and/or time after it has
already been set, press the setting button MODE twice
in order to return to settings mode.
Time

5. Measuring blood pressure

Positioning cuff
• Bare your left wrist, making sure that the circulation in the
arm is not restricted by any clothes etc. that are too tight.
Position the cuff on the inside of your wrist.
• Fasten the cuff with the Velcro fastening so that the upper
edge of the monitor is positioned approx. 1 cm below the
ball of your thumb.
• The cuff has to be fitted tightly around the wrist but should
not constrict it.
Correct posture
• Rest for approx. 5 minutes before each measurement.
Other wise there may be divergences.
• You can perform the measurement
while sitting or lying. To carry out a
blood pressure measurement, make
sure you are sitting comfortably with
your arms and back leaning on some-
thing. Do not cross your legs. Place
your feet flat on the ground. Make sure to rest your arm
and move it. Always make sure that the cuff is at heart
level. Otherwise significant deviations can occur. Relax
your arm and the palm of your hand.
16