WAGNER CONTROL PRO 350 M Traduction Du Mode D'emploi Original page 22

Masquer les pouces Voir aussi pour CONTROL PRO 350 M:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
GB
Airless units develop extremely high spraying pressures.
1
2
3
Be safety-conscious !
16
Warning!
Attention: Danger of injury by injection!
Danger
Never put your ngers, hands or any other parts of the body into the
spray jet!
Never point the spray gun at yourself, other persons or animals.
Never use the spray gun without safety guard.
Do not treat a spraying injury as a harmless cut. In case of injury to
the skin through coating materials or solvents, consult a doctor
immediately for quick and expert treatment. Inform the doctor
about the coating material or solvent used.
The operating instructions state that the following points must
always be observed before starting up:
1. Faulty units must not be used.
2. Secure spray gun using the safety catch on the trigger.
3. Ensure that the unit is properly earthed. The connection
must take place through a correctly earthed two-pole and earth
socket outlet.
4. Check allowable operating pressure of high-pressure hose and
spray gun.
5. Check all connections for leaks.
The instructions regarding regular cleaning and maintenance of the
unit must be strictly observed.
Before any work is done on the unit or for every break in work the
following rules must be observed:
1. Release the pressure from spray gun and hose.
2. Secure the spray gun using the safety catch
on the trigger.
3. Switch o unit.
Translation of the original operating instructions
Control Pro 350 M

Publicité

Table des Matières
loading

Table des Matières