Cover Plate; Dust Extraction - Makita 4350T Manuel D'instruction

To remove the blade, open the tool opener to the position
shown in the figure. Pull the saw blade out toward the base.
1
► 1. Jig saw blade
NOTE:
• Occasionally lubricate the roller.
Hex wrench storage
1
► 1. Base 2. Hex wrench
When not in use, store the hex wrench as shown in the
figure to keep it from being lost.
Anti-splintering device
► 1. Base 2. Anti-splintering device
For splinter-free cuts, the anti-splintering device can
be used. To install the anti-splintering device, move the
tool base all the way forward and fit it from the back
of tool base. When you use the cover plate, install the
anti-splintering device onto the cover plate.
2
1
2
CAUTION:
• The anti-splintering device cannot be used when
making bevel cuts.

Cover plate

► 1. Cover plate 2. Base
Use the cover plate when cutting decorative veneers,
plastics, etc. It protects sensitive or delicate surfaces
from damage. Fit it on the back of the tool base.

Dust extraction

The dust nozzle (optional accessory) is recommended
to perform clean cutting operations.
► 1. Dust nozzle 2. Base
To attach the dust nozzle on the tool, insert the hook of
dust nozzle into the hole in the base.
The dust nozzle can be installed on either left or right side of the base.
6 ENGLISH
1
2
1
2