Siemens EQ7 Plus aromaSense M Série Mode D'emploi page 27

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
Empty drip tray
Replace drip tray
● Empty the drip tray 23 and reinsert it.
The appliance is ready for use again.
calc'nClean
Duration: approx. 36 minutes.
calc'nClean combines the separate functions
of descaling and cleaning.
If both programmes are due to be run soon,
the espresso machine automatically
suggests this service programme.
Cleaning and service
Short rinse
milk system
calc'nClean
The start button 8 flashes while the different
calc'nClean processes are running. The
figures on the top right indicate the progress
of the programme.
Important: If there is a water filter in the
water tank 11, it needs to be removed
before the service programme is run.
à
● Press the
button 3.
calc'nClean
start
● Press the start button 8; the display 5 will
guide you through the programme.
Empty drip tray
Replace drip tray
● Empty the drip tray 23 and reinsert it.
● Swivel the coffee outlet 9 to the right until
it clicks into place.
start
Place 1 l container
Place suction pipe in container
● Place a container with a capacity of at
least 1 l under the milk frother 10.
● Place the end of the suction pipe 10d in
the container.
● Press the start button 8. The appliance
rinses twice.
Cleaning
Open powder compartment
● Open the powder compartment 18.
Insert Siemens cleaning tablet
and close drawer
● Drop a Siemens cleaning tablet in the
drawer 18 and close.
Remove filter
start
Info: If the water filter is activated, the dis-
play will prompt you to remove the filter,
then press the start button 8 again.
Add 0.5 l water and descaler
● Pour lukewarm water into the empty water
tank 11 up to the "0.5 l" mark and then
dissolve two Siemens descaling tablets
in it.
● Press the start button 8. The descaling
programme now runs for about
20 minutes.
Descaling
Not enough descaling fluid.
Refill fluid
start
Info: If there is not enough descaling solu-
tion in the water tank 11, the corresponding
prompt is displayed. Pour in descaling solu-
tion and press the start button 8 again.
en
start
start
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Te712 sérieTe717 sérieTe712201rwTe717209rw

Table des Matières