Safety Information; Symbols Used In This Manual; Interference With Other Electronic Devices; Introduction - Rain Bird WR2 Wireless Sensor Manuel De L'utilisateur

Safety Information

Symbols used in this manual:

F
Symbol alerts the user to the presence
of un-insulated "dangerous voltage"
within the product's enclosure that may
be of sufficient magnitude to constitute
a risk of electric shock.
!
Symbol alerts the user to the presence
of important operating or maintenance
(servicing) instructions.
Interference With Other
Electronic Devices
risk of electronic interference:
Controller Interface or Sensor.
!
THE IRRIGATION CONTROLLER / TIMER
SHOULD BE ISOLATED VIA A CIRCUIT
BREAKER OR CUTOFF SWITCH.
!
BATTERIES REMOVED FROM THE
SENSOR SHOULD BE DISPOSED
OF IN ACCORDANCE WITH LOCAL
REGULATIONS.
!
CHANGES OR MODIFICATIONS NOT
EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE
COULD VOID THE USER'S AUTHORITY
TO OPERATE THE EQUIPMENT.

Introduction

Congratulations on your purchase of the
WR2 Wireless Sensor.
The Rain Bird Wireless Rain Sensor is designed for
temperature events.
Programming logic can suspend irrigation using the "Quick
Sensor
Rain Bird's commitment to this Intelligent Use of Water. The
Please read through these instructions in their
entirety or refer to the programming demo (www.
rainbird.com/WR2) before installing your WR2
Wireless Sensor. Also, reference your irrigation
system controller / timer installation instructions
for the proper connection of rain sensors.
WR2 Wireless Sensor
Wireless Rain / Freeze
1