Technical Specifications - Velleman VLE5 Mode D'emploi

 When you do not press the discharge button during the discharge
process, then the charger will automatically switch to the fast-charge
mode once the discharge process is finished. The LED turns red to
confirm this.
 The LED will turn green when the battery pack is fully charged.
 If the fast-charge process takes more than 6 hours, then the charger
automatically switches to trickle charge mode for safety reasons. The
LED will turn green to confirm that the trickle charge mode has been
activated.
 Disconnect the battery pack from the charger.
 Disconnect the charger from the AC outlet.
5. Maintenance
 Disconnect the charger from the mains and wipe it with a moist, lint-
free cloth. Do not use alcohol or solvents.
 Do not submerge the charger in water or any other liquid.
 There are no user-serviceable parts inside the adaptor. Refer to an
authorized dealer for service and/or spare parts.

6. Technical Specifications

power supply
input power
output power
selectable output voltage
with selectable
maximum charging
current
over-current protection
operating
temperature/humidity
storage
temperature/humidity
dimensions
weight
Use this device with original accessories only. Velleman nv cannot
be held responsible in the event of damage or injury resulting from
(incorrect) use of this device. For more info concerning this product
and the latest version of this manual, please visit our website
www.velleman.eu. The information in this manual is subject to
change without prior notice.
V. 02 – 27/04/2017
VLE5
100-240 V~, 50/60 Hz
19 W
14 VA (max.)
2 4 5
2.8 5.6 7.0
500 mA or 1000 mA
1 A/250 V fuse (not replaceable)
0 ~ 35 °C/< 75 % non-condensing
-20 ~ 50 °C/10 ~ 90 % non-condensing
76 × 122 × 59.5 mm
± 300 g
4
6 7 8
8.4 9.6 11.2 14.0
10 cells
V
©Velleman nv