Hkoenig WOD8 Manuel D'utilisation page 6

typeplate corresponds to your main voltage of
your installation. If this is not the case, contact the dealer
and do not connect the unit
• Never leave the unit unattended while in operation.
• Please keep this document at hand and give it to the
future owner in case of transfer of your device
• The device must not be used if it has been dropped, it
obvious signs of damage are visible or if it has leaks.
(*) Competent qualified person : after sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to avoid
all danger. In any case you should return the appliance to this service.
SPECIAL SAFEGUARDS
• Unroll the power cord completely.
• Check that the tension in force in the country where you are corresponds to that indicated
on the apparatus.
• Connect the apparatus in a socket-outlet in good state, and connected to the ground, to
avoid any danger.
• Disconnect the power source cable before any operation of cleaning of maintenance and
accessories assembly.
• Stand the appliance on a table or flat surface.
• Do not use or keep this product outside when it is raining.
• Certain parts of the appliance can get hot. Do not touch them, as you may burn yourself.
• Never modify the appliance in anyway.
OPERATION INSTRUCTIONS
• Before plugging in your new Raclette grill, check to see that the electric circuit is not
overloaded with other appliances. This unit should always be operated on a separate 220-
240 volt, AC outlet which is able to supply min.16A
• Be certain that your unit is resting level on the countertop. Avoid using pans that are unstable
and easily tipped. Place pan under heating element.
• Turn the switch on 1 position. The pilot light will glow indicating the heating element is
energized and heating will begin immediately
• The metal surfaces will become hot. Do not touch while is use. When cooking is finished, turn
the thermostat back to « O » position.
• The surface is hot when using or before cooled. Never touch the appliance before it's cooled
to avoid scald.
• If the hotplate is not to be in use for a long period of time, it is recommended to unplug unit
from the outlet. This helps to prevent accidental burns.